作成したデータをまとめる
出力されたガーバーファイルを
先ほどのElecrowのサイトのDescriptionに記載されている
1. Gerber Files Required:
The following files would be needed for the 2-layers PCB production:
Top layer : pcbname.GTL
Bottom layer : pcbname.GBL
Solder Stop Mask top : pcbname.GTS
Solder Stop Mask Bottom : pcbname.GBS
Silk Top : pcbname.GTO
Silk Bottom : pcbname.GBO
NC Drill : pcbname.TXT
Mechanical layer : pcbname.GML
Note:
The Gerber file must be RS-274x format, The format of the drill file can be Excellon
Board outline must be included at least in one layer if there isn’t GML/GKO layer.
All the holes will be plated by default, if you need some holes not plated, please name the non-plated holes as pcb.name-NPTH.txt and leave a comment;
For one layer PCB, If you need the solder mask on the top and bottom side, please order it as 2 layer PCB and leave a comment ‘1 layer PCB with solder mask both side”.
https://www.elecrow.com/special-offer-for-2-layer-10-10cm-max-green-pcb-10pcs-1479.html より引用
上記8つのファイルをフォルダに入れ
zipもしくはrarに圧縮します。
いざ注文
先ほどの注文ページに戻り
各項目を選択していきます。
ん・・・?
Shipped in 4 to 7 days!?
最大7日で届くの??
前は確か最大25日だったような・・・
とりあえず読めないときはJapanボタンで日本語に!
ファイルを選択で
先ほど作ったzip,rarフォルダを選択します。
そしてADD TO CARTをクリック!
そうするとSHOPPING CARTに先ほどの商品が入ります。
画面右上のSHOPPING CARTからCHECKOUTを選択
ログインします。アカウント登録してない場合は登録する。
請求先住所に住所を入力もしくは
登録済みの住所を選択する
発送方法
日本語だと・・・意味が分からないですね(汗)
[航空便を登録してください]を選びます
英語だと[Registered Airmail]
ここにはリードタイムが書いてないんですね・・・
支払方法はPayPalを利用します。
別途登録が必要です。
後は内容を確認して
注文を確定する(Place Order)をクリック
PayPalで支払いをして
後は到着を待ちます。
Elecrow側から注文確定メールが届きます。
日本語になってる!?
あと、4~7日は発送までのリードタイムでした。
そうなるとやっぱり最大25日かかるのかな?
ちなみに・・・細かくメールを送ってくれます・注文確定・ガーバーデータ確認・製造開始のお知らせ・発送完了
発送完了時には写真まで添付されてくるので
ありがたいです
細かくメールを送ってくれないようです。
注文確定と
発送完了の時だけです。
発送時の写真は変わらずありました。
まとめ
いままでせっせとアイロンかけて、エッチング液でシャバシャバして
1枚作るのにどれだけ手間がかかっていたのかと思うと
これで、送料込みで¥1,800は安すぎる・・・
自作する気無くなる(笑)
欠点があるならこんなに大量に基板いらない(笑)

